Ducati Aurea

Ducati 125 Aurea
Manufacturer Ducati Meccanica S.p.A.
Class Standard
Engine Air-cooled single cylinder 4-stroke, 124.4 cc (7.59 in3) displacement, 55.2 mm ∅ x 52 mm, 6.8:1 compression, 25° forward inclined. Dell’Orto MB18BS carburetor.
Top speed 53 mph (85 km/h)
Power 6.5 bhp (4.8 kW) @ 6500 rpm
Transmission 4 speed manual. Gear ratios: I 1:2.69, II 1:1.85, III 1.36, IV 1:1. Chain 118 links 1/2″ x 3/16″ R-roller ∅ 8.51. Sprockets 17T front, 41T rear.
Suspension Front: Marzocchi hydraulically damped telescopic fork. Rear: non-adjustable twin hydraulic shock swingarm.
Brakes expanding double shoe drum, front and rear, 123 mm ∅ x 25 mm width, cable-operated
Tires 2.75 in x 16 in, tube type on spoke rims
Wheelbase 1.2586 mm (0.04955 in)
Dimensions L: 1,920 mm (76 in)
H: 910 mm (36 in)
Seat height 790 mm (31 in)
Weight 90 kg (200 lb) (dry)
103.3 kg (228 lb) (wet)
Fuel capacity 15 L (4.0 US gal)
Oil capacity 1.2 L (0.32 US gal)
Related 125 Bronco, 125TV and 125T

The Ducati 125 Aurea is a Ducati motorcycle made from 1958 to 1962; it was only superficially different from the Bronco of 1960 to 1966.

The process that produced the Aurea, and the Bronco that followed, was a form of motorcycle marketing that was practiced with this marque at the time. Ducati’s American importer, Berliner Motor Corporation would fly their US dealers to Italy to view the models in Ducati’s lineup, alongside a choice of handlebars, seats, gas tanks and fenders that would fit on that model, and the dealers would pick which components in combination with which bike would most likely sell in the US market. By this process, the 125 cc full-cradle framed 125 TV ended up with the stylish sporty fuel tank of the 125 Sport, a much higher spec model. Two years later, the Aurea would have its low, racing or “drag bar” style handle bars replaced with upright touring handlebars, and have added knobby, off-road tires, producing the 125 Bronco.

Notes

See also

  • List of motorcycles of the 1950s


Similar Posts

  • Ducati Vento

    Ducati Vento 1979 Ducati Vento Manufacturer Ducati/MotoTrans Production 1976-1983 Class Café racer Engine Air-cooled bevel drive SOHC single cylinder four stroke Bore / stroke 76 mm × 75 mm (3.0 in…

  • Ducati 50 Scrambler

    Ducati 50 Scrambler Manufacturer Ducati Production 1970-1971 Class On/off road Engine 50 cc (3.1 cu in) single cylinder Air-cooled two stroke Bore / stroke 39 mm × 42 mm (1.5 in × 1.7 in) Compression ratio…

  • Ducati

    Ducati Motor Holding S.p.A Company type Subsidiary Industry Motorcycle manufacturing Founded July 4, 1926 (1926-07-04) Founders Antonio Cavalieri Ducati Adriano Cavalieri Ducati Bruno Cavalieri Ducati Headquarters Bologna , Italy…

  • Ducati Diana Mark 3

    Ducati 250 Mark 3 Manufacturer Ducati Production 1962-1966 Predecessor Ducati Diana Successor Ducati 250 Mark 3 Class sports Engine Air-cooled bevel drive SOHC single cylinder four stroke…

  • Ducati 851

    Ducati 851 Manufacturer Ducati Production 1987-1992 Successor Ducati 888 Class Sport bike Engine 851 cc (52 cu in), 90° V-twin, fuel injected, 4 valves per cylinder desmodromic, liquid cooled Bore…

  • Ducati Pantah

    Ducati Pantah Ducati Pantah 600TL Manufacturer Ducati Also called Ducati Pantah 600 TL Production 1980-1986 Successor SuperSport Class Sportbike Engine 90° V-twin The Ducati Pantah is an…