Yamaha MT-07 Maintenance Schedule Chart

The following manual maintenance guide is intended for the MT-07 motorcycles of model years 2014-2023. There are several parts that require regular maintenance and attention to keep the motorcycle in prime condition and avoid damage while riding.

The Yamaha MT-07 is a naked bike motorcycle launched by Yamaha since 2014. It features an M419E engine with a liquid-cooled 688cc DOHC configuration.

Periodic maintenance chart for the emission control system

  • From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months.
  • Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service.
No. ITEM ROUTINE INITIAL ODOMETER READINGS
600 mi
(1000 km)
or
1 month
4000 mi
(7000 km)
or
6 months
8000 mi
(13000 km)
or
12 months
12000 mi
(19000 km)
or
18 months
16000 mi
(25000 km)
or
24 months
20000 mi
(31000 km)
or
30 months
1 *

Fuel line

  • Check fuel hoses for cracks or damage.
  • Replace if necessary.
2 *

Spark plugs

  • Check condition.
  • Adjust gap and clean.
     
  • Replace.
       
3 *

Valve clearance

  • Check and adjust valve clearance when engine is cold.
Every 26600 mi (42000 km)
4 *

Crankcase breather system

  • Check breather hose for cracks or damage.
  • Replace if necessary.
5 *

Fuel injection

  • Adjust synchronization.
6 *

Exhaust system

  • Check for leakage.
  • Tighten if necessary.
  • Replace gasket(s) if necessary.
7 *

Evaporative emission control system (for California only)

  • Check control system for damage.
  • Replace if necessary.

General maintenance and lubrication chart

No. ITEM ROUTINE INITIAL ODOMETER READINGS
600 mi
(1000 km)
or
1 month
4000 mi
(7000 km)
or
6 months
8000 mi
(13000 km)
or
12 months
12000 mi
(19000 km)
or
18 months
16000 mi
(25000 km)
or
24 months
20000 mi
(31000 km)
or
30 months
1 *

Diagnostic system check

  • Perform dynamic inspection using Yamaha diagnostic tool.
  • Check the error codes.
2 *

Air filter element

  • Replace.
Every 24000 mi (37000 km)
3

Air filter check hose

  • Clean.
4 *

Clutch

  • Check operation.
  • Adjust or replace cable.
5 *

Front brake

  • Check operation, fluid level, and for fluid leakage.
  • Replace brake pads if necessary.
6 *

Rear brake

  • Check operation, fluid level, and for fluid leakage.
  • Replace brake pads if necessary.
7 *

Brake hoses

  • Check for cracks or damage.
  • Check for correct routing and clamping.
  • Replace.
Every 4 years
8 *

Brake fluid

  • Change.
Every 2 years
9 *

Wheels

  • Check runout and for damage.
  • Replace if necessary.
10 *

Tires

  • Check tread depth and for damage.
  • Replace if necessary.
  • Check air pressure.
  • Correct if necessary.
11 *

Wheel bearings

  • Check bearings for smooth operation.
  • Replace if necessary.
12 *

Swingarm pivot bearings

  • Check operation and for excessive play.
  • Moderately repack with lithium-soap-based grease.
Every 32000 mi (50000 km)
13

Drive chain

  • Check chain slack, alignment and condition.
  • Adjust and lubricate chain with a special O-ring chain lubricant thoroughly.
Every 600 mi (1000 km) and after washing the motorcycle, riding in the rain or riding in wet areas
14 *

Steering bearings

  • Check bearing assemblies for looseness.
  • Moderately repack with lithium-soap-based grease.
Every 12000 mi (19000 km)
15 *

Chassis fasteners

  • Check all chassis fitting and fasteners.
  • Correct if necessary.
16

Brake lever pivot shaft

  • Apply silicone grease lightly.
17

Brake pedal pivot shaft

  • Apply lithium-soap-based grease lightly.
18

Clutch lever pivot shaft

  • Apply lithium-soap-based grease lightly.
19

Shift pedal pivot shaft

  • Apply lithium-soap-based grease lightly.
20

Sidestand pivot

  • Check operation.
  • Apply molybdenum disulfide grease lightly.
21 *

Sidestand switch

  • Check operation and replace if necessary.
22 *

Front fork

  • Check operation and for oil leakage.
  • Replace if necessary.
23 *

Shock absorber assembly

  • Check operation and for oil leakage.
  • Replace if necessary.
24 *

Rear suspension link pivots

  • Check operation.
  • Correct if necessary.
25

Engine oil

  • Change (warm engine before draining).
26

Engine oil filter cartridge

  • Replace.
27 *

Cooling system

  • Check hoses for cracks or damage.
  • Replace if necessary.
  • Change coolant.
28 *

Front and rear brake switches

  • Check operation.
29 *

Control cables

  • Apply Yamaha cable lubricant or other suitable cable lubricant thoroughly.
30 *

Throttle grip

  • Check operation.
  • Check throttle grip free play, and adjust if necessary.
  • Lubricate cable and grip housing.
31 *

Lights, signals and switches

  • Check operation.
  • Adjust headlight beam.

Similar Posts

  • Yamaha Artist Services

    Yamaha Artist Services, Inc. Aeolian Building, current seat of YASI Abbreviation YASI Formation 1987 (1987) Founded at New York City Legal status Active Headquarters Manhattan Region United States…

  • Yamaha Lexam

    Yamaha Lexam Manufacturer Yamaha Motor Vietnam Parent company Yamaha Motors, Japan Production 2009–present Class Underbone Engine 113.7 cc (6.94 cu in), 4 stroke, 2 valve, SOHC, air-cooled, single Bore /…

  • 2024 Honda CR-V Maintenance Manual Guide

    Before Performing Maintenance Inspection and Maintenance Safety When Performing Maintenance Parts and Fluids Used in Maintenance Service Maintenance MinderTM To Use Maintenance MinderTM Maintenance Under the Hood…

  • Yamaha YZ450F

    Yamaha YZ450F 2010 Yamaha YZ450F Manufacturer Yamaha Motor Company Predecessor Yamaha YZ250 Class Motocross Engine DOHC, multivalve, water-cooled, four-stroke, single The Yamaha YZ450F is a four-stroke racing…

  • Yamaha CT2

    Yamaha CT2 1972. Note: Indicators and seat cover not original. The Yamaha CT2 was an early version of the popular 175cc Trail/Enduro motorcycle. The CT2 followed on…