Honda CBX250RS

CBX250RS-E in original Japanese colours, located in the Honda Collection Hall.
Honda CBX250RS
Manufacturer Honda
Predecessor Honda CB250RS
Engine 249 cc (15.2 cu in), air-cooled, single
Bore / stroke 72 mm × 61.3 mm (2.83 in × 2.41 in)
Compression ratio 10.5:1
Ignition type CDI
Transmission 6-speed, chain drive
Brakes Front: disc
Rear: drum
Rake, trail 98 mm (3.9 in)
Wheelbase 1,355 mm (53.3 in)
Dimensions L: 2,090 mm (82 in)
W: 745 mm (29.3 in)
H: 1,060 mm (42 in)
Seat height 770 mm (30 in)
Fuel capacity 15 L (3.3 imp gal; 4.0 US gal)
Related Honda GB250
Honda XR350
Honda CBX250S

The Honda CBX250RS is a motorcycle first sold by Honda in May 1983 in Japan as their new 250cc sports bike with a view to replacing the popular CB250RS. The engine was based on the XR series with particular links to the XR350 bottom end, including a six-speed gearbox and the same oil pump. The stroke is also the same, but the bore reduced to bring the capacity down to 249 cc (15.2 cu in). The balance shaft was also discarded, with the engine instead being rubber mounted. Unlike any other XR engine the top was given two camshafts. The bike was also equipped with dual carburettors, only one of which was equipped with a pilot circuit and which open different amounts depending on how much the throttle is twisted.

The CBX250RS-E was sold in the United Kingdom between 1984 and 1986 with an introductory price of £1398. It proved to be a sales flop, being more expensive than the CB250RS which was still on sale at the time and not being notably better. The release was also tarnished with stories of bikes wearing out camshafts and rockers very quickly. In the end an estimated 300 were sold. The model had stronger sales in Japan but was soon replaced by the GB250 which was styled as a cafe racer; this model was successfully sold in Japan until 2000 with only minor changes, the most notable of which was the move to using a single carburettor.

References

  • Honda press release in Japanese


Similar Posts

  • Honda SH150i

    Type of motorcycle Honda SH150i Honda SH150 Manufacturer Honda Engine 152.7 cc (9.32 cu in), liquid-cooled, 4-stroke, SOHC, single Bore / stroke 58 mm × 57.8 mm (2.28 in × 2.28 in) Compression ratio 11.0:1 Ignition…

  • Honda Dio

    Scooter model from Honda Type of motorcycle Honda Dio 4th generation Dio Manufacturer Honda Production 1988–present Assembly Japan (until 2001)China (from 2001) Class Scooter Engine 50 cc (3.1 cu in)…

  • Honda CB1100F

    Type of motorcycle Honda CB1100F Manufacturer Honda Production 1983 Predecessor Honda CB900F Successor Honda CB1100 Class Standard Engine Air-cooled inline 4-cyl, 4-stroke, double overhead camshafts (DOHC), four…

  • Honda CRF250L

    Dual-Sport Motorcycle Type of motorcycle Honda CRF250L Manufacturer Honda Production 2012–2020 Assembly Japan Class Dual-sport Engine 249.6 cc (15.23 cu in) liquid-cooled 4-stroke 4-valve DOHC single Top speed 130 km/h (80 mph)…

  • Honda MT125R

    Type of motorcycle Honda MT125R Manufacturer Honda Racing Service Center Production 1976–1979 Predecessor Honda CR93Honda RC149 Successor Honda RS125R Engine 124.9 cc (7.62 cu in) two-stroke single Bore / stroke…

  • Honda RVF400

    Type of motorcycle Honda RVF400 Manufacturer Honda Production 1994–1996 Assembly Kumamoto, Japan Predecessor Honda VFR400R (NC30) Class Sport bike Engine 399 cc (24.3 cu in), 4-stroke, liquid-cooled, 90°, V4 Bore…