Honda NX650 Dominator

Honda NX650 Dominator
Manufacturer Honda
Production 1988-2003
Successor Honda XR650L  
Class Dual-sport
Engine 644 cc, single-cylinder, four-stroke engine
Compression ratio 8.3:1
Power 44.00 hp (32 kW) at 6000 rpm
Torque 39 lbf⋅ft (53 N⋅m) at 5000 rpm
Ignition type Electric start
Transmission 5-speed manual, chain final drive
Brakes Front: disc / Rear: disc
Tires 90/90-21 54S (front)
120/90-17 64S (rear)
Wheelbase 56.4 in (143.5 cm)
Dimensions L: 86.4 in (219.5 cm)
W: 35 in (89 cm)
H: 48 in (122 cm)
Seat height 34.3in (87 cm)
Weight 335 lb (152 kg) (dry)
370 lb (168 kg) (wet)
Fuel capacity 3.4 US gal, of which 0.66 US gal reserve (13 litres, of which 2.5 L is reserve)
Fuel consumption 45 mpg (19 kpl)
Related Honda XR600

The Honda NX650 Dominator is a dual-sport motorcycle. It was manufactured by Honda from 1988 to 2003. Between this period, several variants of the model were released with different fairing designs or changes to the mechanical systems. Reference can be seen to RD02 for early models or RD08 for later models.

Design

Its engine is slightly larger than that of the XR600L, which debuted in 1985. The 97mm bore engine was enlarged to 100 mm and stroked from 80 to 82mm for 644cc. With 44 horsepower at 6,000 rpm, the engine had 53 N⋅m of torque at 5,000 rpm. A gear-driven counterbalancing system helps to smooth out vibrations created by the large single-cylinder engine. The compression ratio of 8.3:1 for the four valves is aided by a single chain-driven overhead camshaft. The intake is via a 40 mm Keihin constant-velocity carburettor, reaching as low as 5.2 L/100km (45 mpg) from 12.8 liters (3.4 gallons) in the tank. The bike features a dry-sump (frame carries oil supply) engine.

The Dominator has a dual exhaust located alongside the rear fender and its powertrain is a wet clutch powering a five-speed gearbox.

The non-adjustable fork has 41mm tubes and supplies 8.5 inches of travel; the rake is 28.5 degrees, and the trail is 4.5 inches. A fork brace is built into the underside of the fender. The front carries a 21-inch spoked wheel with a 90/90 tire. The motorcycle has a single front disc brake with a twin-piston caliper.

In the back, the single-shock setup allows for preload alterations, with rear-wheel travel at 7.5 inches. The rear carries a 17-inch spoked wheel with a 120/90 tire. The rear wheel features a drum brake on the US model, disk on later European models. The footpegs have rubber inserts, intended to appeal to urban riders. If a rider was interested in more off-road use, the inserts could be punched out, leaving saw-toothed metal pegs, which are useful in precarious situations.

Sales

United States’ sales of the NX650 were disappointing and it was withdrawn from the US market after only two years in 1990. The European version sold well and was marketed through 2003.

Variants

Other variations of the NX650 included the NX125, NX150, NX200, NX250, NX350, NX400, and NX500.

References

  • Honda NX650 Dominator Review, Motorcycle Network. Retrieved 2021-06-19


Similar Posts

  • Honda CM125

    Type of motorcycle Honda CM125 Manufacturer Honda Motor Company Also called Honda Custom 125 Production 1978–2002 Successor Honda CA125 Rebel Class Cruiser Engine 124 cc (7.6 cu in), air-cooled, four-stroke,…

  • Honda CB1100F

    Type of motorcycle Honda CB1100F Manufacturer Honda Production 1983 Predecessor Honda CB900F Successor Honda CB1100 Class Standard Engine Air-cooled inline 4-cyl, 4-stroke, double overhead camshafts (DOHC), four…

  • Honda CG125

    Honda motorcycle Type of motorcycle Honda CG125 Manufacturer Honda Motor Company Also called CG125 Fan and CG125 Circa Honda TMX 125 Alpha (Philippines) Parent company Honda motor…

  • Honda RC143

    1960 Japanese motorcycle Type of motorcycle Honda RC143 Manufacturer Honda Production 1960 Predecessor Honda RC142 Successor Honda 2RC143 Class Grand Prix motorcycle racing 125cc class Engine 124.6 cc…

  • Honda GB500

    Type of motorcycle GB500 Manufacturer Honda Production 1985–1990 Predecessor GB250 Class Café racer Engine 498 cc (30.4 cu in) air-cooled RFVC 4-valve SOHC single Bore / stroke 92 mm × 75 mm (3.6 in…

  • Honda CB125TD Super Dream

    Type of motorcycle Honda CB125TD Super Dream Honda CB125TD 1982–8 Manufacturer Honda Motor Company Production 1982–1988 Assembly Japan Class Standard/sport bike Engine 124 cc (7.6 cu in), air-cooled, four stroke,…