Yamaha MT-07 Maintenance Schedule Chart

Updated:February 10, 2026

The following manual maintenance guide is intended for the MT-07 motorcycles of model years 2014-2023. There are several parts that require regular maintenance and attention to keep the motorcycle in prime condition and avoid damage while riding.

The Yamaha MT-07 is a naked bike motorcycle launched by Yamaha since 2014. It features an M419E engine with a liquid-cooled 688cc DOHC configuration.

Periodic maintenance chart for the emission control system

From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months.
Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service.

No.		ITEM	ROUTINE	INITIAL	ODOMETER READINGS
No.		ITEM	ROUTINE	600 mi (1000 km) or 1 month	4000 mi (7000 km) or 6 months	8000 mi (13000 km) or 12 months	12000 mi (19000 km) or 18 months	16000 mi (25000 km) or 24 months	20000 mi (31000 km) or 30 months
1	*	Fuel line	Check fuel hoses for cracks or damage. Replace if necessary.		✓	✓	✓	✓	✓
2	*	Spark plugs	Check condition. Adjust gap and clean.		✓		✓		✓
2	*	Spark plugs	Replace.			✓		✓
3	*	Valve clearance	Check and adjust valve clearance when engine is cold.	Every 26600 mi (42000 km)
4	*	Crankcase breather system	Check breather hose for cracks or damage. Replace if necessary.		✓	✓	✓	✓	✓
5	*	Fuel injection	Adjust synchronization.	✓	✓	✓	✓	✓	✓
6	*	Exhaust system	Check for leakage. Tighten if necessary. Replace gasket(s) if necessary.	✓	✓	✓	✓	✓	✓
7	*	Evaporative emission control system (for California only)	Check control system for damage. Replace if necessary.				✓		✓

General maintenance and lubrication chart

No.		ITEM	ROUTINE	INITIAL	ODOMETER READINGS
No.		ITEM	ROUTINE	600 mi (1000 km) or 1 month	4000 mi (7000 km) or 6 months	8000 mi (13000 km) or 12 months	12000 mi (19000 km) or 18 months	16000 mi (25000 km) or 24 months	20000 mi (31000 km) or 30 months
1	*	Diagnostic system check	Perform dynamic inspection using Yamaha diagnostic tool. Check the error codes.	✓	✓	✓	✓	✓	✓
2	*	Air filter element	Replace.	Every 24000 mi (37000 km)
3		Air filter check hose	Clean.	✓	✓	✓	✓	✓	✓
4	*	Clutch	Check operation. Adjust or replace cable.	✓	✓	✓	✓	✓	✓
5	*	Front brake	Check operation, fluid level, and for fluid leakage. Replace brake pads if necessary.	✓	✓	✓	✓	✓	✓
6	*	Rear brake	Check operation, fluid level, and for fluid leakage. Replace brake pads if necessary.	✓	✓	✓	✓	✓	✓
7	*	Brake hoses	Check for cracks or damage. Check for correct routing and clamping.		✓	✓	✓	✓	✓
7	*	Brake hoses	Replace.	Every 4 years
8	*	Brake fluid	Change.	Every 2 years
9	*	Wheels	Check runout and for damage. Replace if necessary.		✓	✓	✓	✓	✓
10	*	Tires	Check tread depth and for damage. Replace if necessary. Check air pressure. Correct if necessary.		✓	✓	✓	✓	✓
11	*	Wheel bearings	Check bearings for smooth operation. Replace if necessary.		✓	✓	✓	✓	✓
12	*	Swingarm pivot bearings	Check operation and for excessive play.		✓	✓	✓	✓	✓
12	*	Swingarm pivot bearings	Moderately repack with lithium-soap-based grease.	Every 32000 mi (50000 km)
13		Drive chain	Check chain slack, alignment and condition. Adjust and lubricate chain with a special O-ring chain lubricant thoroughly.	Every 600 mi (1000 km) and after washing the motorcycle, riding in the rain or riding in wet areas
14	*	Steering bearings	Check bearing assemblies for looseness.	✓	✓	✓	✓	✓	✓
14	*	Steering bearings	Moderately repack with lithium-soap-based grease.	Every 12000 mi (19000 km)
15	*	Chassis fasteners	Check all chassis fitting and fasteners. Correct if necessary.		✓	✓	✓	✓	✓
16		Brake lever pivot shaft	Apply silicone grease lightly.		✓	✓	✓	✓	✓
17		Brake pedal pivot shaft	Apply lithium-soap-based grease lightly.		✓	✓	✓	✓	✓
18		Clutch lever pivot shaft	Apply lithium-soap-based grease lightly.		✓	✓	✓	✓	✓
19		Shift pedal pivot shaft	Apply lithium-soap-based grease lightly.		✓	✓	✓	✓	✓
20		Sidestand pivot	Check operation. Apply molybdenum disulfide grease lightly.		✓	✓	✓	✓	✓
21	*	Sidestand switch	Check operation and replace if necessary.	✓	✓	✓	✓	✓	✓
22	*	Front fork	Check operation and for oil leakage. Replace if necessary.		✓	✓	✓	✓	✓
23	*	Shock absorber assembly	Check operation and for oil leakage. Replace if necessary.		✓	✓	✓	✓	✓
24	*	Rear suspension link pivots	Check operation. Correct if necessary.			✓		✓
25		Engine oil	Change (warm engine before draining).	✓	✓	✓	✓	✓	✓
26		Engine oil filter cartridge	Replace.	✓		✓		✓
27	*	Cooling system	Check hoses for cracks or damage. Replace if necessary.		✓	✓	✓	✓	✓
27	*	Cooling system	Change coolant.					✓
28	*	Front and rear brake switches	Check operation.	✓	✓	✓	✓	✓	✓
29	*	Control cables	Apply Yamaha cable lubricant or other suitable cable lubricant thoroughly.	✓	✓	✓	✓	✓	✓
30	*	Throttle grip	Check operation. Check throttle grip free play, and adjust if necessary. Lubricate cable and grip housing.		✓	✓	✓	✓	✓
31	*	Lights, signals and switches	Check operation. Adjust headlight beam.	✓	✓	✓	✓	✓	✓