Yamaha Royal Star

Yamaha Royal Star
Manufacturer Yamaha
Production 1983-1993, 1999-2013
Class Cruiser
Engine V4, 1,294 cubic centimetres (79.0 cu in)
Bore / stroke 2.99 x 2.59 inches
(75.9 x 65.8 mm)
Power 99.3 metric horsepower (73.0 kW) @6000 rpm
Torque 123.0 newton-metres (90.7 lbf⋅ft) @4750 rpm
Transmission 5 speed manual
Brakes Front: Dual Discs With 4-piston Calipers
Rear: Single Disc With 4-piston Calipers
Wheelbase 1,690 millimetres (67 in)
Dimensions L: 2,705 millimetres (106.5 in)
W: 900 millimetres (35 in)
H: 1,565 millimetres (61.6 in)
Weight 377 kilograms (831 lb) (wet)
Footnotes / references
[3]
1996 Yamaha Royal Star

In 1996 Yamaha introduced the Royal Star motorcycle. This motorcycle uses the basic power package from the Yamaha Venture Royale.

Other machines using variations of this engine include the Royal Star Venture, the Royal Star Tour Deluxe, and the V-Max.

Vehicle information

1997 Yamaha Royal Star Tour Deluxe

Appearance

The Yamaha Royal Star was the first Star Motorcycle Yamaha introduced.

Standard and Tour Classic versions were initially made. The Standard model had four mufflers and no windscreen or side bags, though they were available as accessories. The Tour Classic had four mufflers, a windscreen, and soft or leather-covered hard side bags. In 1997 a Tour Deluxe version was introduced. The Tour Deluxe had two mufflers, a windscreen, and hard side bags.

On the Tour Classic and the Tour Deluxe, the seat height is 28.5 in (720 mm), the wheelbase is 66.7 in (1,690 mm), with a wet weight of 377 kilograms (831 lb). The Standard model was a little lighter and the seat was a little lower.

Mechanical

2000 Yamaha Royal Star Tour Classic

The drive package on the Royal Star includes a liquid-cooled 1,294 cc (79.0 cu in) V4 engine. It has four valves per cylinder, overhead camshafts, and shim-over bucket valves. The five-speed overdrive transmission is part of the engine case and both the engine and transmission share oil. The drive shaft and final drive assembly are built into the left side of the double-sided swing arm. Swing arm motion is damped by a mono-shock mounted horizontally under the center rear of the frame, forward of the rear wheel. The clutch is of the wet plate design and is hydraulically activated by the left hand lever. The brake system uses two disk brakes on the front and one disk on the right rear. All calipers are of four-piston design.

References


Similar Posts

  • Yamaha FZR1000

    Yamaha FZR1000 Manufacturer Yamaha Production 1987-1995 Predecessor Yamaha FZ750 Successor YZF1000R Thunderace Class Sport bike Engine 1,003 cc (61.2 in3) liquid-cooled inline four-cylinder. 20-valve Bore / stroke…

  • 2026 Yamaha YZF-R7

    Technical Specifications Engine Type 689cc liquid-cooled, 4-stroke, DOHC inline twin-cylinder; 4-valves per cylinder Bore x Stroke 80.0mm x 68.6mm Compression Ratio 11.5:1 Horsepower 72.4 hp @ 8,750…

  • |

    Yamaha WR250F Cable Routing Diagram

    Frame and engine (front left side view) Components Clutch cable Throttle cable (return) Throttle cable (pull) Handlebar switch lead (left) Start switch lead Cable holder Handlebar switch…

  • List of Yamaha motorcycles

    The following is a list of motorcycles, scooters and mopeds produced by the Yamaha Motor Company. First and last bike Yamaha YA-1 YA-1 built August 1954, produced…

  • Yamaha YZ450FX

    Yamaha YZ450FX Manufacturer Yamaha Motor Company Parent company Yamaha Corporation Production Since 2016 Class Enduro Engine Single-cylinder, DOHC, Multivalve, water-cooled, four-stroke Transmission 5-speed, wet clutch, chain drive…

  • Yamaha YZF-R15

    Yamaha YZF-R15 Manufacturer Yamaha Motor Company Also called Yamaha R15 Parent company Yamaha Corporation Production 2008–present Class Sport bike Engine 149.8 cc (9.14 cu in) liquid-cooled 4-stroke 4-valve SOHC single-cylinder…