Honda NS125

Honda NS125
Honda NS125F
Manufacturer Honda Motor Company
Production 1986–1993 (UK)
Assembly Atessa, Italy
Class Sport bike
Engine 124.5 cc (7.60 cu in) two-stroke, liquid-cooled, single
Bore / stroke 56.0 mm × 50.6 mm (2.20 in × 1.99 in)
Compression ratio 6.5:1
Ignition type Capacitor discharge electronic ignition.
Transmission 6-speed manual; chain final drive
Frame type Duplex cradle; square section steel
Suspension Front: telescopic
Rear: swingarm single shock absorber
Brakes Front: disc
Rear: drum
Tires Front: 3.25 x 16
Rear: 3.50 x 18
Wheelbase 1.350 m (4 ft 5.1 in) (F)
1.360 m (4 ft 5.5 in) (R)
Dimensions L: 2.000 m (6 ft 6.7 in) (F)
2.035 m (6 ft 8.1 in) (R)
W: .720 m (2 ft 4.3 in) (F)
.690 m (2 ft 3.2 in) (R)
H: 1.140 m (3 ft 8.9 in) (F)
1.120 m (3 ft 8.1 in) (R)
Seat height .780 m (2 ft 6.7 in) (F)
Unknown (R)
Weight 108 kg (238 lb) (F)
118 kg (260 lb) (R) (dry)
Fuel capacity 14.5 L (3.2 imp gal; 3.8 US gal) (F)
13.0 L (2.9 imp gal; 3.4 US gal) (R)

The Honda NS125 was first presented at the Bologna Motor Show in December 1984 and went on sale in April 1985.
The engine is a liquid cooled, 124.5 cc (7.60 cu in), two-stroke which used Honda’s ATAC system (Automatically Controlled Torque Amplification Chamber). However the ATAC equipped models were not available in the UK. The NS was Honda’s first attempt at the high end 125cc sports bike market in Italy; therefore it was built in Atessa, Italy and many of the parts used were made by well known Italian brands such as Dell’Orto for the carburetor, Marzocchi forks and single rear shock and Grimeca wheels and front disk brake. Honda, Japan supplied the spec sheets and a few parts like the electrics, piston and barrel.

The Honda NS125 which was available as an “F” naked, or an “R” fully faired is commonly mistaken as an older NSR, although it shares no real parts or design to it. This model is most easily identifiable by its singular square headlight, rather than the later NSR’s ‘foxeye’ design

References

Sources
  • All specifications in infobox obtained from Cox, Penny (1995). Honda NS125 Owners Workshop Manual (1986–1993). Haynes Publishing. ISBN 1859600565.


Similar Posts

  • Honda CB700SC

    Type of motorcycle Honda CB700SC Nighthawk S Manufacturer Honda Production 1984–1986 Predecessor Honda CB750 Successor Nighthawk 750 (RC38) Class Standard Engine 696 cc (42.5 cu in), four-stroke, air/oil-cooled, inline four…

  • Honda XR600

    Motorcycle Honda XR600 2000 model A 1993 Honda XR600R A 1995 Road modified XR600R The Honda XR600R was an offroad dual-sportmotorcycle powered by an air-cooled single cylinder,…

  • Honda CBR125R

    Sport bike Type of motorcycle Honda CBR125RSCA 2004–2006 Honda CBR125R Manufacturer Honda Production 2004–2016 Assembly Thailand (A.P. Honda) Predecessor Honda NSR125 Class Sport bike Engine 125 cc (7.6 cu in),…

  • Honda X11

    Type of motorcycle Honda X11 Manufacturer Honda Also called Honda CB1100SF Production 1999–2001 Class Standard Engine 1,137 cc (69.4 cu in) liquid-cooled 4-stroke 16-valve DOHC inline-4 Bore / stroke 79.0 mm…

  • Honda CB450DX-K

    Type of motorcycle Honda CB450DX Manufacturer Honda Motor Company Production 1989–1992 Predecessor Honda CB400N Successor Honda CB500 twin Engine 447 cc (27.3 cu in), air-cooled, SOHC six valve parallel twin…