Honda NS125

Honda NS125
Honda NS125F
Manufacturer Honda Motor Company
Production 1986–1993 (UK)
Assembly Atessa, Italy
Class Sport bike
Engine 124.5 cc (7.60 cu in) two-stroke, liquid-cooled, single
Bore / stroke 56.0 mm × 50.6 mm (2.20 in × 1.99 in)
Compression ratio 6.5:1
Ignition type Capacitor discharge electronic ignition.
Transmission 6-speed manual; chain final drive
Frame type Duplex cradle; square section steel
Suspension Front: telescopic
Rear: swingarm single shock absorber
Brakes Front: disc
Rear: drum
Tires Front: 3.25 x 16
Rear: 3.50 x 18
Wheelbase 1.350 m (4 ft 5.1 in) (F)
1.360 m (4 ft 5.5 in) (R)
Dimensions L: 2.000 m (6 ft 6.7 in) (F)
2.035 m (6 ft 8.1 in) (R)
W: .720 m (2 ft 4.3 in) (F)
.690 m (2 ft 3.2 in) (R)
H: 1.140 m (3 ft 8.9 in) (F)
1.120 m (3 ft 8.1 in) (R)
Seat height .780 m (2 ft 6.7 in) (F)
Unknown (R)
Weight 108 kg (238 lb) (F)
118 kg (260 lb) (R) (dry)
Fuel capacity 14.5 L (3.2 imp gal; 3.8 US gal) (F)
13.0 L (2.9 imp gal; 3.4 US gal) (R)

The Honda NS125 was first presented at the Bologna Motor Show in December 1984 and went on sale in April 1985.
The engine is a liquid cooled, 124.5 cc (7.60 cu in), two-stroke which used Honda’s ATAC system (Automatically Controlled Torque Amplification Chamber). However the ATAC equipped models were not available in the UK. The NS was Honda’s first attempt at the high end 125cc sports bike market in Italy; therefore it was built in Atessa, Italy and many of the parts used were made by well known Italian brands such as Dell’Orto for the carburetor, Marzocchi forks and single rear shock and Grimeca wheels and front disk brake. Honda, Japan supplied the spec sheets and a few parts like the electrics, piston and barrel.

The Honda NS125 which was available as an “F” naked, or an “R” fully faired is commonly mistaken as an older NSR, although it shares no real parts or design to it. This model is most easily identifiable by its singular square headlight, rather than the later NSR’s ‘foxeye’ design

References

Sources
  • All specifications in infobox obtained from Cox, Penny (1995). Honda NS125 Owners Workshop Manual (1986–1993). Haynes Publishing. ISBN 1859600565.


Similar Posts

  • Honda AC15

    Type of motorcycle Honda AC15 Manufacturer Honda Motor Company, Limited Also called Honda Dream 50 (AC15) Production 1997 (CB50V) and 1998 (CB50W) Class Sport bike Engine 50 cc…

  • Honda CBX

    Sports motorcycle manufactured from 1978 to 1982 This article is about the six-cylinder motorcycle made from 1978 to 1982. For Honda models with the prefix “CBX”, see…

  • Honda Shadow

    Shadow VT750C 52° V-twin Shadow VT750C Aero in Healesville, Victoria Manufacturer Honda Production September 1997-present Assembly Marysville, Ohio, Kumamoto and Hamamatsu Predecessor Shadow VT800C Class Cruiser Engine…

  • Honda CB1100R

    Type of motorcycle Honda CB1100R Honda CB1100RD Manufacturer Honda Production 1980-1983 Predecessor Honda CB900F Successor Honda VF1000R Class Sport bike Engine 1,062 cc (64.8 cu in) air cooled inline 4,…

  • Honda NT1100

    Type of motorcycle Honda NT1100 Manufacturer Honda Production 2021–present Predecessor Honda NT700V Deauville Class Sport Touring motorcycle Engine 1,084 cc (66.1 cu in) liquid-cooled 4-stroke 8-valve DOHC Straight-twin engine Bore…

  • Honda CT90

    Type of motorcycle CT90 Manufacturer Honda Production 1966–79 Predecessor CT200 Successor CT110 Class Step-through Engine 89 cc 4-stroke air-cooled single Transmission 4-speed, automatic clutch Frame type Stamped steel…