Yamaha Zuma 125 Maintenance Schedule (Service Interval)

The Yamaha Zuma 125 is an automatic scooter produced by Yamaha USA from 2009 to the present. This scooter is powered by a 125cc engine paired with an automatic transmission. The following is a list of regular maintenance charts or Periodic Maintenance Service for the Yamaha Zumaa 125, sourced from the official manual. These maintenance tasks include servicing moving parts and checking or adjusting various motorcycle components. Maintenance should be performed based on mileage (in miles or kilometers) or time in months, whichever comes first.TIP

  • From 12000 mi (19000 km) or 36 months, repeat the maintenance intervals starting from 4000 mi (7000 km) or 12 months.
  • Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service.
  • Air filters

    • This model uses disposable-type oil-coated paper air filter element. Cleaning it with compressed air will damage it. Replace only.
    • Service the air filter elements more frequently when riding in unusually wet or dusty areas.
  • Hydraulic brake service

    • Regularly check the brake fluid levels and fill the reservoirs as required.
    • Replace the internal components of the brake master cylinders and calipers, and change the brake fluid every two years.
    • Replace the brake hoses every four years or sooner if cracked or damaged.

Periodic maintenance chart for the emission control system

No. ITEM ROUTINE INITIAL ODOMETER READINGS
600 mi
(1000 km)
or
1 month		 2000 mi
(4000 km)
or
6 months		 4000 mi
(7000 km)
or
12 months		 6000 mi
(10000 km)
or
18 months		 8000 mi
(13000 km)
or
24 months		 10000 mi
(16000 km)
or
30 months
1 * Fuel line Check fuel hoses for cracks or damage.
Replace if necessary.		 ✔️ ✔️ ✔️ ✔️ ✔️
2 Spark plug Check condition.
Adjust gap and clean.
Replace at 4000 mi (7000 km) or 12 months and thereafter every 4000 mi (6000 km) or 12 months.		 ✔️ Replace. ✔️ Replace. ✔️
3 * Valve clearance Check and adjust valve clearance
when engine is cold.		 ✔️ ✔️ ✔️ ✔️ ✔️ ✔️
4 * Crankcase breather system Check breather hose for cracks or damage.
Replace if necessary.		 ✔️ ✔️ ✔️ ✔️ ✔️
5 * Fuel injection Check engine idle speed. ✔️ ✔️ ✔️ ✔️ ✔️ ✔️
6 * Exhaust system Check for leakage.
Tighten if necessary.
Replace gasket(s) if necessary.		 ✔️ ✔️ ✔️ ✔️ ✔️ ✔️

General maintenance and lubrication chart

No. ITEM ROUTINE INITIAL ODOMETER READINGS
600 mi
(1000 km)
or
1 month		 2000 mi
(4000 km)
or
6 months		 4000 mi
(7000 km)
or
12 months		 6000 mi
(10000 km)
or
18 months		 8000 mi
(13000 km)
or
24 months		 10000 mi
(16000 km)
or
30 months
1 * Diagnostic system check Perform dynamic inspection using Yamaha diagnostic tool.
Check the error codes.		 ✔️ ✔️ ✔️ ✔️ ✔️ ✔️
2 Air filter element Replace. Every 12500 mi (20000 km)
3 Air filter check hose Clean. ✔️ ✔️ ✔️ ✔️ ✔️ ✔️
4 V-belt case air filter element Clean. ✔️ ✔️ ✔️ ✔️ ✔️ ✔️
Replace. Every 12500 mi (20000 km)
5 * Front brake Check operation, fluid level, and for fluid leakage.
Replace brake pads if necessary.		 ✔️ ✔️ ✔️ ✔️ ✔️ ✔️
6 * Rear brake Check operation, fluid level, and for fluid leakage.
Check brake lever free play, and adjust if necessary.
Replace brake pads if necessary.		 ✔️ ✔️ ✔️ ✔️ ✔️ ✔️
7 * Brake hoses Check for cracks or damage.
Check for correct routing and clamping.		 ✔️ ✔️ ✔️ ✔️ ✔️
Replace. Every 4 years
8 * Brake fluid Change. Every 2 years
9 * Wheels Check runout and for damage.
Replace if necessary.		 ✔️ ✔️ ✔️ ✔️ ✔️
10 * Tires Check tread depth and for damage.
Replace if necessary.
Check air pressure.
Correct if necessary.		 ✔️ ✔️ ✔️ ✔️ ✔️
11 * Wheel bearings Check bearings for smooth operation.
Replace if necessary.		 ✔️ ✔️ ✔️ ✔️ ✔️
12 * Steering bearings Check bearing assemblies for looseness.
Moderately repack with
lithium-soap-based grease every 8000 mi (13000 km) or 24 months.		 ✔️ ✔️ ✔️ ✔️ Repack. ✔️
13 * Chassis fasteners Check all chassis fitting and fasteners.
Correct if necessary.		 ✔️ ✔️ ✔️ ✔️ ✔️
14 Front brake lever pivot shaft Apply silicone grease lightly. ✔️ ✔️ ✔️ ✔️ ✔️
15 Rear brake lever pivot shaft Apply silicone grease lightly. ✔️ ✔️ ✔️ ✔️ ✔️
16 * Unified braking system Lubricate link pivots and moving parts with silicone grease.
Lubricate cable end with lithium-soap-based grease.		 ✔️ ✔️ ✔️ ✔️ ✔️
17 * Centerstand and sidestand pivots Check operation.
Apply lithium-soap-based grease lightly.		 ✔️ ✔️ ✔️ ✔️ ✔️
18 * Sidestand switch Check operation and replace if necessary. ✔️ ✔️ ✔️ ✔️ ✔️ ✔️
19 * Front fork Check operation and for oil leakage.
Replace if necessary.		 ✔️ ✔️ ✔️ ✔️ ✔️
20 * Shock absorber assemblies Check operation and for oil leakage.
Replace if necessary.		 ✔️ ✔️ ✔️ ✔️ ✔️
21 Engine oil Change. (See pages 4-6 and 7-10.) ✔️ When the oil change indicator flashes (after the initial 600 mi [1000 km] and every 1800 mi (3000 km) thereafter)
Check oil level and vehicle for oil leakage. ✔️ Every 1800 mi (3000 km)
22 Engine oil strainer Clean. ✔️ Every 1800 mi (3000 km)
23 * Cooling system Check coolant level and vehicle for coolant leakage. ✔️ ✔️ ✔️ ✔️ ✔️
Change coolant. Every 3 years
24 Final transmission oil Check vehicle for oil leakage.
Change.		 ✔️ ✔️ ✔️
25 * V-belt Replace. Every 11000 mi (18000 km)
26 * Front and rear brake switches Check operation. ✔️ ✔️ ✔️ ✔️ ✔️ ✔️
27 * Control cables Apply Yamaha cable lubricant or other suitable cable lubricant thoroughly. ✔️ ✔️ ✔️ ✔️ ✔️ ✔️
28 * Throttle grip Check operation.
Check throttle grip free play, and adjust if necessary.
Lubricate cable and grip housing.		 ✔️ ✔️ ✔️ ✔️ ✔️
29 * Lights, signals and switches Check operation.
Adjust headlight beam.		 ✔️ ✔️ ✔️ ✔️ ✔️ ✔️

Related articles

Leave a Reply

Your email address will not be published. Required fields are marked *